Victron - Battery Monitors
Lynx Shunt VE.Net
The Lynx Shunt VE.Net is an intelligent 1000A shunt with location for a fuse, the built in battery monitor accurately monitors the state of charge on your battery. Use the Blue Power Panel or VE.Net panel for reading out the information. Part of the modular Lynx distribution system.
Lynx Shunt VE.Can
The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse, the built in battery monitor accurately monitors the state of charge of your battery. Use the Color Control GX for reading out the information. Part of the modular Lynx distribution system.
Lynx Ion + Shunt 350/600
The Lynx Ion is the battery management system (BMS) that controls the 24V/180Ah Lithium Ion batteries. It contains the 350A safety contactor, and controls the cell-balancing, charging and discharging of the system. The Lynx Ion will protect the battery pack from both overcharging and depletion.
VE.Net Blue Power Panel GX
The Blue Power Panel GX is the same as the Blue Power Panel 2, but with a new design. An extra advantage of this panel is the easy mounting: the included mounting frame allows the user to mount the panel from either front or back side. Due to the mounting frame, the mounting holes will no longer be in sight.
The body of the GX panel is made of plastic, which makes the panel lighter and adds a modern look to the panel.
The BMV-700 is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere-hours consumed and the state of charge of a battery. Ampere-hours consumed are calculated by integrating the current flowing in or out of the battery.
The BMV-600S and BMV-602S are high precision battery monitors. The essential function of a battery monitor is to calculate ampere-hours consumed and the state of charge of a battery. Ampere-hours consumed are calculated by integrating the current flowing in or out of the battery.
- Highest resolution: 10mA (0,01A) with 500A shunt.
- Lowest current consumption: 1mA.
- Easiest to wire: the BMV-600 comes with shunt, 10 meter RJ 12 UTP cable and 2 meter battery cable with fuse. No other components needed.
- Easiest to install: separate front bezel for square or round appearance; ring for rear mounting and screws for front mounting.
The BMV-602S has a second voltage measurement input. This input can for example be used to measure the voltage of a starter battery.
The Battery Balancer equalizes the state of charge of two series connected 12 V batteries, or of several parallel strings of series connected batteries.
When the charge voltage of a 24 V battery system increases to more than 27 V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1 A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge.
If needed, several balancers can be paralleled.
A 48 V battery bank can be balanced with three Battery Balancers.