Power Electronics
Energy Solutions have been a distributor for Victron Energy since 2000 and since 2006 we have been the largest distributor of their products in the UK.
The Victron product range includes sinewave inverters, sinewave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and more. Worldwide Victron Energy has a strong, unrivalled reputation for technical innovation, reliability, and build quality and at Energy Solutions they form a central role in many of our systems across all markets.
Batteries
Batteries
Victron Energy. Energy. Anytime. Anywhere. Victron Energy has various modern and efficient battery systems with high energy densities.
Battery Isolators and Combiners
Isolate a battery from DC loads and/or DC charge sources. Preserve battery charge in case a system is unattended, for system maintenance or in an emergency
Connect, use and charge two or more batteries with one dynamo.
Battery Management Systems
- Specifically designed for use with Victron Lithium Smart Battery 12,8 V & 25,6 V range.
- Communicates directly with the lithium battery via the battery’s M8 circular connector cables.
- Protects the lithium battery cells from overvoltage, undervoltage or a too low or high temperature by turning off loads or
- Charge sources via its “load disconnect” and “charge disconnect“ terminals.
- The maximum number of batteries that can be connected to the BMS is 20.
Battery Monitors
The Victron Energy battery monitors monitor the charge status of your battery and ensure a uniform charge status
Battery Protect
The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
Charge and Convert
Autotransformers
The Victron Energy Autotransformer (AT) supports many different wiring configurations. It can increase your system’s ability to adapt to different design and Voltage requirements, and also be used to balance loads in split-phase 120/240Vac systems. Specialty systems such as boats and vehicles may face different shore configurations while traveling, an autotransformer can help by being flexible and enabling connections to most grid configurations
Chargers
The modern and powerful battery chargers from Victron Energy match the charging voltage with every battery system
DC-DC Converters
Victron Energy's DC-DC converters are useful if you do not have a suitable voltage device.
Inverters
Inverters convert the energy stored in direct current (DC) sources like batteries to an alternating current (AC) .
Inverters/Chargers
Victron's inverter/charger models range from a small 500VA unit all the way up to a 15kVA unit. Multiple units can be connected in parallel and/or 3-phase configuration. Thus it is possible to create systems ranging in power size from a small single phase system up to an impressive 180kVA 3-phase system.
Inverter/Chargers/MPPT
Elements including an inverter/charger and a MPPT charge controller come prewired together inside a single unit. This greatly simplifies most installations, saving time and money
Isolation Transformers
Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in.
Solar
BlueSolar Panels
- Low voltage-temperature coefficient enhances high-temperature operation.
- Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
- 25-Year limited warranty on power output and performance.
- 5-Year Limited warranty on materials and workmanship.
- Sealed, waterproof, multifunctional junction box gives high level of safety.
- High performance bypass diodes minimize the power drop caused by shade.
- Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
- A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
- Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
- Pre wired quick-connect system with PV-ST01 connectors.
Solar Charge Controllers
Victron have a wide range of both MPPT and PWM solar charge controllers. Both are widely used to charge batteries with solar power.
The PWM controller is in essence a switch that connects a solar array to the battery. The result is that the voltage of the array will be pulled down to near that of the battery
MPPT: Ultra Fast Maximum Power Point Tracking. By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
Control and Monitoring
Panels and Monitoring
The most up-to-date monitoring solution on the planet means peace of mind off the grid. Bring the best of Victron systems together in a powerful experience that will redefine life off the grid. Thanks to the know-how that powers the connected products, you can monitor and control your systems, prevent issues and resolve challenges straight from the VictronConnect App and VRM portal.
Meters
Energy Meters are typically used in an Energy Storage System, to measure the power and energy of the entire application at the distribution box and minimises energy import or export to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices.
Accessories
Accessories
Mount Victron Energy monitors and panels on walls. Or choose from other accessories: from many types of cables to individual adapters and converters.
Videos
Related Products
Sign up to our mailing list
Keep up to date with the latest news and offers.
Submitting your details indicates that you have read and agree to our privacy policy and cookie policy. You can unsubscribe from our emails by using the link at the bottom of all emails we send.