Victron Smart BMS CL 12/200
Victron Smart BMS CL 12/200
Part Code: BAT-VIC-LI-BMS-SM-12-200
MF Code: BMS210055000
£225.00 RRP ex VAT
£196.88 ex VAT
£236.26 inc VAT
Available in 11 days
Victron Smart BMS 12/200 - for Victron 12,8V Victron LiFePO4 (LFP) batteries. Up to 5 batteries may be connected in parallel - BMS210055000
Product Information
The Smart BMS 12/200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator such as in vehicles and boats.
It combines a Current Limiter, Battery Combiner and Battery Protector in a robust and compact solution and lets you safely connect any size 12V alternator (and starter battery), loads and chargers to Smart Lithium batteries.
The Smart BMS 12/200 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery cell voltage, high battery cell voltage or over temperature.
The dedicated alternator connection provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and starter battery) can be safely connected to the Smart Lithium battery (or battery bank) and the starter battery is protected from excessive discharge.
The BMS is equipped with Bluetooth for monitoring and configuration, a remote on/off connector, to turn the BMS (and the system) off via a remote switch and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system.
Features
• Alternator/Starter Batt+ port alternator and battery protection: The input current on the Alternator/Starter Batt+ port is electronically limited to approximately 90 % of the fuse rating. A 100 A fuse, for example, will therefore limit the input current to approximately 90 A and protects the lithium battery against excessive charge current and the alternator against overload (most 12V alternators will overheat and fail if running at maximum output during more than 5 minutes).
• System+ power port to connect loads and additional chargers: Can be used to either charge or discharge the lithium battery (i.e. via an additional charger, an inverter or inverter/charger connected directly to this port) with a maximum continuous current of 200 A in both directions. Can also be used as a load output, thus DC loads can be connected directly to this port.
• Remote on/off terminal: Use it to interrupt charging via the Alternator port and charging and discharging via the System+ port while keeping the BMS functionality active, or to stop charging from the Alternator port only. Alternatively use it as an on/off switch to turn off the system completely.
• Load and Charge disconnect output1): The Smart BMS 12-200 monitors and protects each individual battery cell within the battery and will disconnect the alternator, charge sources or DC loads in case of low/high battery cell voltage or high temperature.
• Pre-Alarm output: Can be used to drive a relay, LED or Buzzer to issue a warning signal before the BMS disconnects the batteries from the system.
• Bluetooth for monitoring and configuration via our VictronConnect app and with Instant Readout the possibility to read out the most important values in real time without the need to connect to the BMS, which enables diagnostics at a glance.
Additional Information
Applications
Marine
Marine is Energy Solutions’ longest established market area, since 1996 we have been working with leading OEM boatbuilders, superyacht owners, boat yards and individual sailing and motor yachts. As well as helping clients find power and control systems that fit their requirements we continually strive to introduce new, innovative products to our customers. We research, design and manufacture in house and provide new ways for our clients to attract customers and set themselves apart in terms of look, efficiency and technology. Working with products from the world’s leading manufacturers we are able to offer clients fully designed systems incorporating all elements form helm panels to tank senders.
find out more
Off Grid
We are the UK’s leading supplier of off grid power systems supplying high quality hybrid power systems to residential and commercial customers across the UK and internationally for whom connection to the grid is not a viable option. Our range of Off Grid Solutions includes EasyGrid – a plug and play hybrid solution for homes and businesses looking for a straightforward, affordable way to generate their own power and Containerised systems – robust, semi bespoke systems ideal for isolated projects. We work with off grid power for a variety of sectors including Residential, Farming, Construction, Commercial, Leisure, Glamping, Broadcast, Monitoring, Humanitarian Aid, Utilities and Telecoms.
find out more
Vehicles
With service, work and recreational vehicles using an increasing amount of tools, equipment and electrical devices onboard there is a growing demand from automotive builders and owners for power & monitoring systems that offer reliable yet sophisticated capabilities. Energy Solutions provides a range of onboard power systems and services for vehicles that allow you to buy or develop the system that is right for your needs.
find out more
Electrification
The move towards net zero and a more sustainable world is driving the electrification of many vehicles and onboard equipment that would have traditionally been powered by fossil fuel combustion engines. Energy Solutions' extensive experience and engineering expertise in battery and inverter systems position us well to support and assist clients as they progress towards their own sustainability goals by developing new ways of powering their systems.
find out moreAbout Us
Manufactured In the UK
We design and manufacture a wide range of products in our factory in the UK. We have invested in state of the art cable processing machines to allow us to automate many aspects of our production, guaranteeing quality and consistency. Our engineering department use advanced mechanical and electrical design tools to drive this process, and we use computerised testing machines to speed up loom construction and validation. We also have in-house facilities to laser cut and engrave control panels, along with 3D printing for prototyping components. None of this manufacturing would be possible without a skilled team of staff, with years of experience in complex builds.
Partners
We work with leading international manufacturers and distribute their products in order to supply our customers with a complete electrical power, monitoring and control solution. We work with some of the biggest names in each market sector and have established ourselves as a key supplier bringing new ideas and technical updates on a continual basis.
Support
During your project, Energy Solutions will be with you every step of the way, from initial consultation to final implementation. Our engineering team will provide comprehensive drawing packages, both 2D and 3D as appropriate, and will assist during commissioning phases. Post-project, our service team will take over to provide ongoing support in the field.